A NBNetBuilder extended by visualisation and editing capabilities. More...

#include <GNENet.h>

Inheritance diagram for GNENet:

Collaboration diagram for GNENet:

Public Member Functions
void	addExplicitTurnaround (std::string id)
	add edge id to the list of explicit turnarounds More...

GNEEdge *	addReversedEdge (GNEEdge edge, GNEUndoList undoList)
	add reversed edge More...

void	changeEdgeEndpoints (GNEEdge *edge, const std::string &newSourceID, const std::string &newDestID)
	modifies endpoins of the given edge More...

void	computeAndUpdate (OptionsCont &oc)
	recompute the network and update lane geometries More...

void	computeEverything (GNEApplicationWindow *window, bool force=false)

void	computeJunction (GNEJunction *junction)

GNEEdge *	createEdge (GNEJunction src, GNEJunction dest, GNEEdge tpl, GNEUndoList undoList, const std::string &suggestedName="", bool wasSplit=false, bool allowDuplicateGeom=false)
	creates a new edge (unless an edge with the same geometry already exists) More...

GNEJunction *	createJunction (const Position &pos, GNEUndoList *undoList)
	creates a new junction More...

void	deleteEdge (GNEEdge edge, GNEUndoList undoList)
	removes edge More...

void	deleteGeometryOrEdge (GNEEdge edge, const Position &pos, GNEUndoList undoList)
	removes geometry when pos is close to a geometry node, deletes the whole edge otherwise More...

void	deleteJunction (GNEJunction junction, GNEUndoList undoList)
	removes junction and all incident edges More...

void	deleteLane (GNELane lane, GNEUndoList undoList)
	removes lane More...

virtual void	drawGLAdditional (GUISUMOAbstractView *const parent, const GUIVisualizationSettings &s) const
	Draws additional, user-triggered visualisations. More...

void	drawName (const Position &pos, const SUMOReal scale, const GUIVisualizationTextSettings &settings, const SUMOReal angle=0) const

void	duplicateLane (GNELane lane, GNEUndoList undoList)
	duplicates lane More...

void	finishMoveSelection (GNEUndoList *undoList)
	register changes to junction and edge positions with the undoList More...

FXApp *	getApp ()

const Boundary &	getBoundary () const
	returns the bounder of the network More...

std::set< GUIGlID >	getGlIDs (GUIGlObjectType type=GLO_MAX)

ShapeContainer &	getShapeContainer ()

NBTrafficLightLogicCont &	getTLLogicCont ()
	returns the tllcont of the underlying netbuilder More...

SUMORTree &	getVisualisationSpeedUp ()
	Returns the RTree used for visualisation speed-up. More...

const SUMORTree &	getVisualisationSpeedUp () const
	Returns the RTree used for visualisation speed-up. More...

	GNENet (NBNetBuilder *netBuilder)
	Constructor. More...

void	joinSelectedJunctions (GNEUndoList *undoList)

void	mergeJunctions (GNEJunction moved, GNEJunction target, GNEUndoList *undoList)
	merge the given junctions edges between the given junctions will be deleted More...

void	moveSelection (const Position &moveSrc, const Position &moveDest)

void	refreshElement (GUIGlObject *o)
	refreshes boundary information for o and update More...

void	removeExplicitTurnaround (std::string id)
	remove edge id from the list of explicit turnarounds More...

void	removeSolitaryJunctions (GNEUndoList *undoList)

void	renameEdge (GNEEdge *edge, const std::string &newID)
	updates the map and reserves new id More...

void	renameJunction (GNEJunction *junction, const std::string &newID)
	updates the map and reserves new id More...

void	replaceJunctionByGeometry (GNEJunction junction, GNEUndoList undoList)

void	requireRecompute ()
	inform the net about the need for recomputation More...

std::vector< GNEAttributeCarrier * >	retrieveAttributeCarriers (const std::set< GUIGlID > &ids, GUIGlObjectType type)
	get the attribute carriers based on GlIDs More...

GNEEdge *	retrieveEdge (const std::string &id, bool failHard=true)
	get edge by id More...

std::vector< GNEEdge * >	retrieveEdges (bool onlySelected=false)
	return all edges More...

GNEJunction *	retrieveJunction (const std::string &id, bool failHard=true)
	get junction by id More...

std::vector< GNEJunction * >	retrieveJunctions (bool onlySelected=false)
	return all junctions More...

std::vector< GNELane * >	retrieveLanes (bool onlySelected=false)
	return all lanes More...

void	reverseEdge (GNEEdge edge, GNEUndoList undoList)
	reverse edge More...

void	save (OptionsCont &oc)
	save the network More...

void	saveJoined (OptionsCont &oc)
	save log of joined junctions (and nothing else) More...

void	savePlain (OptionsCont &oc)
	save plain xml representation of the network (and nothing else) More...

void	setUpdateTarget (FXWindow *updateTarget)
	Set the target to be notified of network changes. More...

GNEJunction *	splitEdge (GNEEdge edge, const Position &pos, GNEUndoList undoList, GNEJunction *newJunction=0)
	split edge at position by inserting a new junction More...

void	splitEdgesBidi (const std::set< GNEEdge * > &edges, const Position &pos, GNEUndoList *undoList)
	split all edges at position by inserting one new junction More...

	~GNENet ()
	Destructor. More...

inherited from GUIGlObject
GUIGLObjectPopupMenu *	getPopUpMenu (GUIMainWindow &app, GUISUMOAbstractView &parent)
	Returns an own popup-menu. More...

GUIParameterTableWindow *	getParameterWindow (GUIMainWindow &app, GUISUMOAbstractView &parent)
	Returns an own parameter window. More...

Boundary	getCenteringBoundary () const
	Returns the boundary to which the view shall be centered in order to show the object. More...

const Boundary &	getZBoundary () const
	Returns the Z boundary (stored in the x() coordinate) values of 0 do not affect the boundary. More...

void	drawGL (const GUIVisualizationSettings &s) const
	Draws the object. More...

Atomar getter methods
const std::string &	getFullName () const
	Returns the full name appearing in the tool tip. More...

virtual const std::string &	getParentName () const
	Returns the name of the parent object (if any) More...

GUIGlID	getGlID () const
	Returns the numerical id of the object. More...

interfaces to be implemented by derived classes
const std::string &	getMicrosimID () const
	Returns the id of the object as known to microsim. More...

virtual void	setMicrosimID (const std::string &newID)
	Changes the microsimID of the object (happens in NETEDIT) More...

GUIGlObjectType	getType () const
	Returns the type of the object as coded in GUIGlObjectType. More...

Parameter table window I/O
void	addParameterTable (GUIParameterTableWindow *w)
	Lets this object know a parameter window showing the object's values was opened. More...

void	removeParameterTable (GUIParameterTableWindow *w)
	Lets this object know a parameter window showing the object's values was closed. More...

Static Public Attributes
static const RGBColor	selectedLaneColor

static const RGBColor	selectionColor

static StringBijection< GUIGlObjectType >	TypeNames
	associates object types with strings More...

Protected Member Functions
void	setPrefix (const std::string &prefix)

helper methods for building popup-menus
void	buildPopupHeader (GUIGLObjectPopupMenu *ret, GUIMainWindow &app, bool addSeparator=true)
	Builds the header. More...

void	buildCenterPopupEntry (GUIGLObjectPopupMenu *ret, bool addSeparator=true)
	Builds an entry which allows to center to the object. More...

void	buildNameCopyPopupEntry (GUIGLObjectPopupMenu *ret, bool addSeparator=true)
	Builds entries which allow to copy the name / typed name into the clipboard. More...

void	buildSelectionPopupEntry (GUIGLObjectPopupMenu *ret, bool addSeparator=true)
	Builds an entry which allows to (de)select the object. More...

void	buildShowParamsPopupEntry (GUIGLObjectPopupMenu *ret, bool addSeparator=true)
	Builds an entry which allows to open the parameter window. More...

void	buildPositionCopyEntry (GUIGLObjectPopupMenu *ret, bool addSeparator=true)
	Builds an entry which allows to copy the cursor position if geo projection is used, also builds an entry for copying the geo-position. More...

void	buildShowManipulatorPopupEntry (GUIGLObjectPopupMenu *ret, bool addSeparator=true)
	Builds an entry which allows to open the manipulator window. More...

Private Member Functions
void	deleteSingleEdge (GNEEdge *edge)
	deletes a single edge More...

void	deleteSingleJunction (GNEJunction *junction)
	deletes a single junction More...

void	initDetectors ()
	Initialises the detector wrappers. More...

void	initTLMap ()
	Initialises the tl-logic map and wrappers. More...

void	insertEdge (GNEEdge *edge)
	inserts a single edge into the net and into the underlying More...

void	insertJunction (GNEJunction *junction)
	inserts a single junction into the net and into the underlying More...

GNEEdge *	registerEdge (GNEEdge *edge)
	registers an edge with GNENet containers More...

GNEJunction *	registerJunction (GNEJunction *junction)
	registers a junction with GNENet containers More...

void	remapEdge (GNEEdge oldEdge, GNEJunction from, GNEJunction to, GNEUndoList undoList, bool keepEndpoints=false)

void	reserveEdgeID (const std::string &id)

void	reserveJunctionID (const std::string &id)

void	update ()
	notify myUpdateTarget More...

Private Attributes
std::set< std::string >	myExplicitTurnarounds
	list of edge ids for which turn-arounds must be added explicitly More...

SUMORTree	myGrid
	the rtree which contains all GUIGlObjects (so named for historical reasons) More...

bool	myNeedRecompute
	whether the net needs recomputation More...

NBNetBuilder *	myNetBuilder
	The internal netbuilder. More...

GUIShapeContainer	myShapeContainer
	the container for additional pois and polygons More...

FXWindow *	myUpdateTarget
	The window to be notofied of about changes. More...

Boundary	myZBoundary
	the z boundary (stored in the x-coordinate), values of 0 are ignored More...

ID Suppliers for newly created edges and junctions
IDSupplier	myEdgeIDSupplier

IDSupplier	myJunctionIDSupplier

Static Private Attributes
static const SUMOReal	Z_INITIALIZED = 1
	marker for whether the z-boundary is initialized More...

Friends
class	GNEChange_Edge

class	GNEChange_Junction

internal GNE components
typedef std::map< std::string, GNEEdge * >	GNEEdges

typedef std::map< std::string, GNEJunction * >	GNEJunctions

GNEEdges	myEdges

GNEJunctions	myJunctions

Detailed Description

A NBNetBuilder extended by visualisation and editing capabilities.

Definition at line 77 of file GNENet.h.

Member Typedef Documentation

typedef std::map<std::string, GNEEdge*> GNENet::GNEEdges

private

Definition at line 419 of file GNENet.h.

typedef std::map<std::string, GNEJunction*> GNENet::GNEJunctions

private

Definition at line 420 of file GNENet.h.

Constructor & Destructor Documentation

GNENet::GNENet ( NBNetBuilder * netBuilder )

Constructor.

Parameters

[in] netbuilder the netbuilder which may already have been filled GNENet becomes responsible for cleaning this up

Definition at line 88 of file GNENet.cpp.

References Boundary::add(), NBEdgeCont::getAllNames(), NBNodeCont::getAllNames(), NBNetBuilder::getEdgeCont(), Boundary::getHeight(), NBNetBuilder::getNodeCont(), Boundary::getWidth(), GUIGlObjectStorage::gIDStorage, myEdges, myGrid, myNetBuilder, myZBoundary, registerEdge(), registerJunction(), NBNodeCont::retrieve(), NBEdgeCont::retrieve(), GUIGlObjectStorage::setNetObject(), NBNodesEdgesSorter::sortNodesEdges(), Boundary::ymin(), and Z_INITIALIZED.

GNENet::~GNENet ( )

Destructor.

Definition at line 142 of file GNENet.cpp.

References myEdges, myJunctions, and myNetBuilder.

Member Function Documentation

void GNENet::addExplicitTurnaround ( std::string id )

add edge id to the list of explicit turnarounds

Definition at line 845 of file GNENet.cpp.

References myExplicitTurnarounds.

Referenced by GNEJunction::setLogicValid().

void GUIGlObject::addParameterTable ( GUIParameterTableWindow * w )

inherited

Lets this object know a parameter window showing the object's values was opened.

Parameters

[in] w The opened parameter window

Definition at line 189 of file GUIGlObject.cpp.

References GUIGlObject::myParamWindows.

GNEEdge * GNENet::addReversedEdge	(	GNEEdge *	edge,
		GNEUndoList *	undoList
	)

add reversed edge

Parameters

[in] edge The edge of which to add the reverse

Returns: Return the new edge or 0

Definition at line 436 of file GNENet.cpp.

References createEdge(), createJunction(), GNEEdge::getDest(), NBEdge::getGeometry(), GUIGlObject::getGlID(), GNEAttributeCarrier::getID(), NBEdge::getInnerGeometry(), NBEdge::getLaneSpreadFunction(), GNEEdge::getNBEdge(), GUISelectedStorage::getSelected(), GNEEdge::getSource(), NBEdge::getTotalWidth(), gSelected, LANESPREAD_RIGHT, PositionVector::move2side(), GNEUndoList::p_begin(), GNEUndoList::p_end(), PositionVector::reverse(), GNEEdge::setAttribute(), SUMO_ATTR_SHAPE, SUMOReal, and toString().

Referenced by GNEViewNet::onCmdAddReversedEdge().

void GUIGlObject::buildCenterPopupEntry	(	GUIGLObjectPopupMenu *	ret,
		bool	addSeparator = `true`
	)

protectedinherited

Builds an entry which allows to center to the object.

Parameters

Definition at line 127 of file GUIGlObject.cpp.

References GUIIconSubSys::getIcon(), ICON_RECENTERVIEW, and MID_CENTER.

void GUIGlObject::buildNameCopyPopupEntry	(	GUIGLObjectPopupMenu *	ret,
		bool	addSeparator = `true`
	)

protectedinherited

Builds entries which allow to copy the name / typed name into the clipboard.

Parameters

Definition at line 136 of file GUIGlObject.cpp.

References MID_COPY_NAME, and MID_COPY_TYPED_NAME.

void GUIGlObject::buildPopupHeader	(	GUIGLObjectPopupMenu *	ret,
		GUIMainWindow &	app,
		bool	addSeparator = `true`
	)

protectedinherited

Builds the header.

Parameters

Definition at line 117 of file GUIGlObject.cpp.

References GUIMainWindow::getBoldFont(), and GUIGlObject::getFullName().

void GUIGlObject::buildPositionCopyEntry	(	GUIGLObjectPopupMenu *	ret,
		bool	addSeparator = `true`
	)

protectedinherited

Builds an entry which allows to copy the cursor position if geo projection is used, also builds an entry for copying the geo-position.

Parameters

Definition at line 168 of file GUIGlObject.cpp.

References GeoConvHelper::getFinal(), MID_COPY_CURSOR_GEOPOSITION, and MID_COPY_CURSOR_POSITION.

void GUIGlObject::buildSelectionPopupEntry	(	GUIGLObjectPopupMenu *	ret,
		bool	addSeparator = `true`
	)

protectedinherited

Builds an entry which allows to (de)select the object.

Parameters

Definition at line 146 of file GUIGlObject.cpp.

References GUIGlObject::getGlID(), GUIIconSubSys::getIcon(), GUIGlObject::getType(), gSelected, ICON_FLAG_MINUS, ICON_FLAG_PLUS, GUISelectedStorage::isSelected(), MID_ADDSELECT, and MID_REMOVESELECT.

void GUIGlObject::buildShowManipulatorPopupEntry	(	GUIGLObjectPopupMenu *	ret,
		bool	addSeparator = `true`
	)

protectedinherited

Builds an entry which allows to open the manipulator window.

Parameters

Definition at line 180 of file GUIGlObject.cpp.

References GUIIconSubSys::getIcon(), ICON_MANIP, and MID_MANIP.

Referenced by GUILaneSpeedTrigger::getPopUpMenu(), and GUITriggeredRerouter::getPopUpMenu().

void GUIGlObject::buildShowParamsPopupEntry	(	GUIGLObjectPopupMenu *	ret,
		bool	addSeparator = `true`
	)

protectedinherited

Builds an entry which allows to open the parameter window.

Parameters

Definition at line 159 of file GUIGlObject.cpp.

References GUIIconSubSys::getIcon(), ICON_APP_TABLE, and MID_SHOWPARS.

Referenced by GUIDetectorWrapper::getPopUpMenu(), GUIContainer::getPopUpMenu(), GUIPerson::getPopUpMenu(), GUILaneSpeedTrigger::getPopUpMenu(), GUICalibrator::getPopUpMenu(), GUIContainerStop::getPopUpMenu(), GUIBusStop::getPopUpMenu(), GUIChargingStation::getPopUpMenu(), GUIEdge::getPopUpMenu(), GUINet::getPopUpMenu(), GUIBaseVehicle::getPopUpMenu(), and GUILane::getPopUpMenu().

void GNENet::changeEdgeEndpoints	(	GNEEdge *	edge,
		const std::string &	newSourceID,
		const std::string &	newDestID
	)

modifies endpoins of the given edge

Definition at line 826 of file GNENet.cpp.

References GNEEdge::getNBEdge(), GNEJunction::getNBNode(), NBEdge::reinitNodes(), requireRecompute(), retrieveJunction(), and update().

Referenced by GNEEdge::setAttribute().

void GNENet::computeAndUpdate ( OptionsCont & oc )

recompute the network and update lane geometries

Definition at line 1005 of file GNENet.cpp.

References NBNetBuilder::compute(), myEdges, myExplicitTurnarounds, myJunctions, myNeedRecompute, and myNetBuilder.

Referenced by computeEverything(), save(), saveJoined(), and savePlain().

void GNENet::computeEverything	(	GNEApplicationWindow *	window,
		bool	force = `false`
	)

Definition at line 687 of file GNENet.cpp.

References computeAndUpdate(), OptionsCont::getOptions(), myNeedRecompute, GNEApplicationWindow::setStatusBarText(), update(), and WRITE_MESSAGE.

Referenced by GNEApplicationWindow::onCmdComputeJunctions(), and GNEViewNet::setEditMode().

void GNENet::computeJunction ( GNEJunction * junction )

Definition at line 709 of file GNENet.cpp.

References NBTrafficLightLogicCont::computeSingleLogic(), NBNode::getControllingTLS(), NBNetBuilder::getEdgeCont(), GNEJunction::getNBNode(), OptionsCont::getOptions(), getTLLogicCont(), myNetBuilder, NBTrafficLightDefinition::setParticipantsInformation(), and NBTrafficLightDefinition::setTLControllingInformation().

Referenced by GNETLSEditor::onCmdDefSwitch().

GNEEdge * GNENet::createEdge	(	GNEJunction *	src,
		GNEJunction *	dest,
		GNEEdge *	tpl,
		GNEUndoList *	undoList,
		const std::string &	suggestedName = `""`,
		bool	wasSplit = `false`,
		bool	allowDuplicateGeom = `false`
	)

creates a new edge (unless an edge with the same geometry already exists)

Parameters

[in]	src	The starting junction
[in]	dest	The ending junction
[in]	tpl	The template edge from which to copy attributes (including lane attrs)
[in]	undoList	The undoList in which to mark changes
[in]	suggestedName
[in]	wasSplit	Whether the edge was created from a split
[in]	allowDuplicateGeom	Whether to create the edge even though another edge with the same geometry exists

Returns: The newly created edge or 0 if no edge was created

Definition at line 219 of file GNENet.cpp.

References GNEEdge::getNBEdge(), GNEJunction::getNBNode(), IDSupplier::getNext(), NBNode::getOutgoingEdges(), GNEChange_Edge, myEdgeIDSupplier, myEdges, GNEUndoList::p_begin(), GNEUndoList::p_end(), requireRecompute(), reserveEdgeID(), retrieveEdge(), GNEJunction::setLogicValid(), SUMOReal, NBEdge::UNSPECIFIED_OFFSET, and NBEdge::UNSPECIFIED_WIDTH.

Referenced by addReversedEdge(), GNEViewNet::onLeftBtnPress(), remapEdge(), replaceJunctionByGeometry(), reverseEdge(), and splitEdge().

GNEJunction * GNENet::createJunction	(	const Position &	pos,
		GNEUndoList *	undoList
	)

creates a new junction

Parameters

[in]	position	The position of the new junction
[in]	undoList	The undolist in which to mark changes

Returns: the new junction

Definition at line 208 of file GNENet.cpp.

References IDSupplier::getNext(), GNEChange_Junction, myJunctionIDSupplier, and myJunctions.

Referenced by addReversedEdge(), joinSelectedJunctions(), GNEViewNet::onLeftBtnPress(), and splitEdge().

void GNENet::deleteEdge	(	GNEEdge *	edge,
		GNEUndoList *	undoList
	)

removes edge

Parameters

[in]	edge	The edge to be removed
[in]	undoList	The undolist in which to mark changes

Definition at line 299 of file GNENet.cpp.

References GNEEdge::getDest(), GUIGlObject::getGlID(), GNEEdge::getSource(), GLO_EDGE, GNEChange_Edge, gSelected, GUISelectedStorage::isSelected(), GNEUndoList::p_begin(), GNEUndoList::p_end(), GNEJunction::removeFromCrossings(), requireRecompute(), and GNEJunction::setLogicValid().

Referenced by deleteGeometryOrEdge(), deleteJunction(), GNEViewNet::deleteSelectedEdges(), remapEdge(), replaceJunctionByGeometry(), reverseEdge(), and splitEdge().

void GNENet::deleteGeometryOrEdge	(	GNEEdge *	edge,
		const Position &	pos,
		GNEUndoList *	undoList
	)

removes geometry when pos is close to a geometry node, deletes the whole edge otherwise

Parameters

[in]	edge	The edge to be removed
[in]	pos	The position that was clicked upon
[in]	undoList	The undolist in which to mark changes

Definition at line 352 of file GNENet.cpp.

References deleteEdge(), and GNEEdge::deleteGeometry().

Referenced by GNEViewNet::onLeftBtnPress().

void GNENet::deleteJunction	(	GNEJunction *	junction,
		GNEUndoList *	undoList
	)

removes junction and all incident edges

Parameters

[in]	junction	The junction to be removed
[in]	undoList	The undolist in which to mark changes

Definition at line 274 of file GNENet.cpp.

References deleteEdge(), NBNode::getEdges(), GUIGlObject::getGlID(), GNEJunction::getNBNode(), GLO_JUNCTION, GNEChange_Junction, gSelected, GUISelectedStorage::isSelected(), myEdges, NODETYPE_PRIORITY, GNEUndoList::p_begin(), GNEUndoList::p_end(), GNEJunction::setAttribute(), SUMO_ATTR_TYPE, and toString().

Referenced by GNEViewNet::deleteSelectedJunctions(), joinSelectedJunctions(), mergeJunctions(), GNEViewNet::onLeftBtnPress(), removeSolitaryJunctions(), and replaceJunctionByGeometry().

void GNENet::deleteLane	(	GNELane *	lane,
		GNEUndoList *	undoList
	)

removes lane

Parameters

[in]	lane	The lane to be removed
[in]	undoList	The undolist in which to mark changes

Definition at line 317 of file GNENet.cpp.

References GNEEdge::getDest(), GUIGlObject::getGlID(), GNELane::getIndex(), NBEdge::getLaneStruct(), GNEEdge::getNBEdge(), GNELane::getParentEdge(), GNEEdge::getSource(), GLO_LANE, gSelected, GUISelectedStorage::isSelected(), GNEUndoList::p_begin(), GNEUndoList::p_end(), NBEdge::Lane::permissions, GNEJunction::removeFromCrossings(), requireRecompute(), GNEJunction::setLogicValid(), and SVC_PEDESTRIAN.

Referenced by GNEViewNet::deleteSelectedEdges(), and GNEViewNet::onLeftBtnPress().

void GNENet::deleteSingleEdge ( GNEEdge * edge )

private

deletes a single edge

Definition at line 972 of file GNENet.cpp.

References GNEReferenceCounter::decRef(), NBEdgeCont::extract(), NBNetBuilder::getDistrictCont(), NBNetBuilder::getEdgeCont(), GUIGlObject::getMicrosimID(), GNEEdge::getNBEdge(), myEdges, myGrid, myNetBuilder, SUMORTree::removeAdditionalGLObject(), GNEEdge::setResponsible(), and update().

Referenced by GNEChange_Edge::redo(), and GNEChange_Edge::undo().

void GNENet::deleteSingleJunction ( GNEJunction * junction )

private

deletes a single junction

Definition at line 961 of file GNENet.cpp.

References GNEReferenceCounter::decRef(), NBNodeCont::extract(), GUIGlObject::getMicrosimID(), GNEJunction::getNBNode(), NBNetBuilder::getNodeCont(), myGrid, myJunctions, myNetBuilder, SUMORTree::removeAdditionalGLObject(), GNEJunction::setResponsible(), and update().

Referenced by GNEChange_Junction::redo(), and GNEChange_Junction::undo().

void GNENet::drawGL ( const GUIVisualizationSettings & s ) const

virtual

Draws the object.

Parameters

[in] s The settings for the current view (may influence drawing)

See also: GUIGlObject::drawGL

Implements GUIGlObject.

Definition at line 197 of file GNENet.cpp.

virtual void GUIGlObject::drawGLAdditional	(	GUISUMOAbstractView *const	parent,
		const GUIVisualizationSettings &	s
	)		const

inlinevirtualinherited

Draws additional, user-triggered visualisations.

Parameters

[in]	parent	The view
[in]	s	The settings for the current view (may influence drawing)

Reimplemented in GUIBaseVehicle, GUIPerson, and GUIContainer.

Definition at line 190 of file GUIGlObject.h.

References UNUSED_PARAMETER.

void GUIGlObject::drawName	(	const Position &	pos,
		const SUMOReal	scale,
		const GUIVisualizationTextSettings &	settings,
		const SUMOReal	angle = `0`
	)		const

inherited

void GNENet::duplicateLane	(	GNELane *	lane,
		GNEUndoList *	undoList
	)

duplicates lane

Parameters

[in]	lane	The lane to be duplicated
[in]	undoList	The undolist in which to mark changes

Definition at line 340 of file GNENet.cpp.

References GNELane::getIndex(), NBEdge::getLaneStruct(), GNEEdge::getNBEdge(), GNELane::getParentEdge(), GNEUndoList::p_begin(), GNEUndoList::p_end(), and requireRecompute().

Referenced by GNEViewNet::onCmdDuplicateLane().

void GNENet::finishMoveSelection ( GNEUndoList * undoList )

register changes to junction and edge positions with the undoList

Definition at line 887 of file GNENet.cpp.

References GNEEdge::getAttribute(), GNEUndoList::p_begin(), GNEUndoList::p_end(), retrieveEdges(), retrieveJunctions(), GNEEdge::setAttribute(), and SUMO_ATTR_SHAPE.

Referenced by GNEViewNet::onLeftBtnRelease().

FXApp* GNENet::getApp ( )

inline

Definition at line 384 of file GNENet.h.

References myUpdateTarget.

Referenced by GNEJunction::drawGL().

const Boundary & GNENet::getBoundary ( ) const

returns the bounder of the network

Definition at line 173 of file GNENet.cpp.

References myGrid.

Referenced by getCenteringBoundary().

Boundary GNENet::getCenteringBoundary ( ) const

virtual

Returns the boundary to which the view shall be centered in order to show the object.

Returns: The boundary the object is within

See also: GUIGlObject::getCenteringBoundary

Implements GUIGlObject.

Definition at line 202 of file GNENet.cpp.

References getBoundary().

const std::string& GUIGlObject::getFullName ( ) const

inlineinherited

Returns the full name appearing in the tool tip.

Returns: This object's typed id

Definition at line 108 of file GUIGlObject.h.

References GUIGlObject::myFullName.

Referenced by GUIGlObject::buildPopupHeader(), GUIGlObject_AbstractAdd::GUIGlObject_AbstractAdd(), GUIGLObjectPopupMenu::onCmdCopyTypedName(), GUIParam_PopupMenuInterface::onCmdOpenTracker(), GUILaneSpeedTrigger::openManipulator(), GUICalibrator::openManipulator(), GUITriggeredRerouter::openManipulator(), GUIDialog_GLChosenEditor::rebuildList(), GUIGlObject_AbstractAdd::remove(), GUISelectedStorage::save(), and GUISUMOAbstractView::showToolTipFor().

GUIGlID GUIGlObject::getGlID ( ) const

inlineinherited

Returns the numerical id of the object.

Returns: This object's gl-id

Definition at line 123 of file GUIGlObject.h.

References GUIGlObject::myGlID.

Referenced by addReversedEdge(), GUIMessageWindow::appendMsg(), GUIGlObject::buildSelectionPopupEntry(), GUINet::createTLWrapper(), deleteEdge(), deleteJunction(), deleteLane(), GNECrossing::drawGL(), GNEInternalLane::drawGL(), GUIContainer::drawGL(), GUIPerson::drawGL(), GUIPolygon::drawGL(), GUILaneSpeedTrigger::drawGL(), GUICalibrator::drawGL(), GUIPointOfInterest::drawGL(), GNEJunction::drawGL(), GUIJunctionWrapper::drawGL(), GNEEdge::drawGL(), GNELane::drawGL(), GUIContainerStop::drawGL(), GUIBusStop::drawGL(), GUIChargingStation::drawGL(), GNEPoly::drawGL(), GUIEdge::drawGL(), GUIBaseVehicle::drawGL(), GUITriggeredRerouter::GUITriggeredRerouterEdge::drawGL(), GUILane::drawGL(), GUIContainer::drawGLAdditional(), GUIPerson::drawGLAdditional(), GUIBaseVehicle::drawGLAdditional(), GUILane::drawLinkRule(), GUIVehicle::getColorValue(), GUIJunctionWrapper::getColorValue(), GUIContainer::getColorValue(), GNELane::getColorValue(), GUIPerson::getColorValue(), GUILane::getColorValue(), GNEJunction::getColorValue(), GUIEdge::getIDs(), GNEEdge::getLaneGlIDs(), GUISUMOAbstractView::getObjectAtPosition(), GUISUMOAbstractView::getObjectsAtPosition(), GUIPerson::getPopUpMenu(), GNELane::getPopUpMenu(), GUIBaseVehicle::getPopUpMenu(), GUILane::getScaleValue(), GUIDialog_GLObjChooser::GUIDialog_GLObjChooser(), GNESelector::handleIDs(), GNETLSEditor::handleMultiChange(), GUIGlChildWindow::isSelected(), GNEViewParent::isSelected(), GUISUMOViewParent::isSelected(), GUISelectedStorage::loadIDs(), GNEViewNet::mergeJunctions(), GUIViewTraffic::onCmdAddRerouter(), GUIGLObjectPopupMenu::onCmdAddSelected(), GUIGLObjectPopupMenu::onCmdCenter(), GUIViewTraffic::onCmdCloseEdge(), GUIViewTraffic::onCmdCloseLane(), GNEViewNet::onCmdDuplicateLane(), GUIApplicationWindow::onCmdEditChosen(), GUIGLObjectPopupMenu::onCmdRemoveSelected(), GNEConnector::onCmdSelectDeadStarts(), GNEConnector::onCmdSelectPass(), GUIPerson::GUIPersonPopupMenu::onCmdStartTrack(), GUIBaseVehicle::GUIBaseVehiclePopupMenu::onCmdStartTrack(), GNEViewNet::onCmdStraightenEdges(), GNEViewNet::onLeftBtnPress(), GUISUMOAbstractView::removeAdditionalGLVisualisation(), GLObjectValuePassConnector< std::pair< SUMOTime, MSPhaseDefinition > >::removeObject(), GUIVehicle::selectBlockingFoes(), GNEJunction::setColor(), GUIMessageWindow::setCursorPos(), and GUIGlObject::~GUIGlObject().

std::set< GUIGlID > GNENet::getGlIDs ( GUIGlObjectType type = GLO_MAX )

Definition at line 635 of file GNENet.cpp.

References GLO_EDGE, GLO_JUNCTION, GLO_LANE, GLO_MAX, GLO_TLLOGIC, myEdges, and myJunctions.

Referenced by GNESelector::getMatches(), GNESelector::onCmdInvert(), and GNEViewParent::onCmdLocate().

const std::string& GUIGlObject::getMicrosimID ( ) const

inlineinherited

Returns the id of the object as known to microsim.

Returns: The id of the object

Definition at line 154 of file GUIGlObject.h.

References GUIGlObject::myMicrosimID.

Referenced by GNETLSEditor::controlsEdge(), GUIGlObject::createFullName(), deleteSingleEdge(), deleteSingleJunction(), GUIGlObject::drawName(), GNEPOI::getAttribute(), GNECrossing::getAttribute(), GNELane::getAttribute(), GNEJunction::getAttribute(), GNEPoly::getAttribute(), GNEEdge::getAttribute(), GNELane::getParentName(), GUIDialog_GLObjChooser::GUIDialog_GLObjChooser(), GNEConnector::handleLaneClick(), GNETLSEditor::handleMultiChange(), GNEEdge::isValid(), GNEViewNet::mergeJunctions(), GNEPoly::moveGeometry(), GNEEdge::moveGeometry(), GUIGLObjectPopupMenu::onCmdAddSelected(), GUIGLObjectPopupMenu::onCmdCopyName(), GNEViewNet::onCmdNodeShape(), GNEViewNet::onLeftBtnPress(), GNEInspector::onUpdCopyTemplate(), registerEdge(), registerJunction(), remapEdge(), GNEEdge::removeConnection(), replaceJunctionByGeometry(), retrieveAttributeCarriers(), GNEEdge::setAttribute(), splitEdge(), and GNEConnector::updateDescription().

GUIParameterTableWindow * GNENet::getParameterWindow	(	GUIMainWindow &	app,
		GUISUMOAbstractView &	parent
	)

virtual

Returns an own parameter window.

Parameters

[in]	app	The application needed to build the parameter window
[in]	parent	The parent window needed to build the parameter window

Returns: The built parameter window

See also: GUIGlObject::getParameterWindow

Implements GUIGlObject.

Definition at line 191 of file GNENet.cpp.

virtual const std::string& GUIGlObject::getParentName ( ) const

inlinevirtualinherited

Returns the name of the parent object (if any)

Returns: This object's parent id

Reimplemented in GUILane, and GNELane.

Definition at line 115 of file GUIGlObject.h.

References StringUtils::emptyString.

Referenced by GUIGLObjectPopupMenu::onCmdCopyEdgeName().

GUIGLObjectPopupMenu * GNENet::getPopUpMenu	(	GUIMainWindow &	app,
		GUISUMOAbstractView &	parent
	)

virtual

Returns an own popup-menu.

Parameters

[in]	app	The application needed to build the popup-menu
[in]	parent	The parent window needed to build the popup-menu

Returns: The built popup-menu

See also: GUIGlObject::getPopUpMenu

Implements GUIGlObject.

Definition at line 180 of file GNENet.cpp.

References GUIGlObject::buildCenterPopupEntry(), GUIGlObject::buildPopupHeader(), and GUIGlObject::buildPositionCopyEntry().

ShapeContainer& GNENet::getShapeContainer ( )

inline

Definition at line 402 of file GNENet.h.

References myShapeContainer.

Referenced by GNEApplicationWindow::onCmdOpenShapes(), and GNEViewNet::onLeftBtnPress().

NBTrafficLightLogicCont& GNENet::getTLLogicCont ( )

inline

returns the tllcont of the underlying netbuilder

Definition at line 337 of file GNENet.h.

References NBNetBuilder::getTLLogicCont(), and myNetBuilder.

Referenced by GNEJunction::addTrafficLight(), computeJunction(), GNETLSEditor::onCmdDefSwitch(), and GNEJunction::removeTrafficLight().

GUIGlObjectType GUIGlObject::getType ( ) const

inlineinherited

Returns the type of the object as coded in GUIGlObjectType.

Returns: The type of the object

See also: GUIGlObjectType

Definition at line 167 of file GUIGlObject.h.

References GUIGlObject::myGLObjectType.

Referenced by GUIGlObject::buildSelectionPopupEntry(), GUIVehicle::drawAction_drawRailCarriages(), GUIPerson::drawAction_drawWalkingareaPath(), GUIContainer::drawGL(), GUIPerson::drawGL(), GUILaneSpeedTrigger::drawGL(), GUICalibrator::drawGL(), GNEJunction::drawGL(), GUIJunctionWrapper::drawGL(), GNELane::drawGL(), GUIContainerStop::drawGL(), GUIBusStop::drawGL(), GUIChargingStation::drawGL(), GUIBaseVehicle::drawGL(), GUITriggeredRerouter::GUITriggeredRerouterEdge::drawGL(), GUILane::drawGL(), GUIPerson::drawGLAdditional(), GUIBaseVehicle::drawGLAdditional(), GUIJunctionWrapper::getColorValue(), GNELane::getColorValue(), GUILane::getColorValue(), GNEJunction::getColorValue(), GNEViewNet::getEdgeAtCursorPosition(), GNEViewNet::getEdgesAtCursorPosition(), GNEViewNet::getJunctionAtCursorPosition(), GNEViewNet::getLaneAtCurserPosition(), GUISUMOAbstractView::getObjectAtPosition(), GUISUMOAbstractView::getObjectsAtPosition(), GUILane::getScaleValue(), GNESelector::handleIDs(), GUIGlChildWindow::isSelected(), GNEViewParent::isSelected(), GUISUMOViewParent::isSelected(), GUISelectedStorage::loadIDs(), GNEViewNet::mergeJunctions(), GNEConnector::onCmdClearSelectedConnections(), GUIGLObjectPopupMenu::onCmdCopyEdgeName(), GNEViewNet::onLeftBtnPress(), LayeredRTree::selectLayer(), GNEJunction::setColor(), and GUISelectedStorage::toggleSelection().

SUMORTree& GNENet::getVisualisationSpeedUp ( )

inline

Returns the RTree used for visualisation speed-up.

Returns: The visualisation speed-up

Definition at line 154 of file GNENet.h.

References myGrid.

Referenced by GNEConnector::buildIinternalLanes(), GNETLSEditor::buildIinternalLanes(), GNEViewNet::onCmdNodeShape(), and GNEViewNet::removeCurrentPoly().

const SUMORTree& GNENet::getVisualisationSpeedUp ( ) const

inline

Returns the RTree used for visualisation speed-up.

Returns: The visualisation speed-up

Definition at line 162 of file GNENet.h.

References myGrid.

const Boundary& GNENet::getZBoundary ( ) const

inline

Returns the Z boundary (stored in the x() coordinate) values of 0 do not affect the boundary.

Definition at line 134 of file GNENet.h.

References myZBoundary.

void GNENet::initDetectors ( )

private

Initialises the detector wrappers.

void GNENet::initTLMap ( )

private

Initialises the tl-logic map and wrappers.

void GNENet::insertEdge ( GNEEdge * edge )

private

inserts a single edge into the net and into the underlying

Definition at line 920 of file GNENet.cpp.

References NBNode::addIncomingEdge(), NBNode::addOutgoingEdge(), NBNetBuilder::getEdgeCont(), NBEdge::getFromNode(), GNEEdge::getNBEdge(), NBEdge::getToNode(), NBEdgeCont::insert(), myNetBuilder, and registerEdge().

Referenced by GNEChange_Edge::redo(), and GNEChange_Edge::undo().

void GNENet::insertJunction ( GNEJunction * junction )

private

inserts a single junction into the net and into the underlying

Definition at line 913 of file GNENet.cpp.

References GNEJunction::getNBNode(), NBNetBuilder::getNodeCont(), NBNodeCont::insert(), myNetBuilder, and registerJunction().

Referenced by GNEChange_Junction::redo(), and GNEChange_Junction::undo().

void GNENet::joinSelectedJunctions ( GNEUndoList * undoList )

Definition at line 729 of file GNENet.cpp.

References NBNodeCont::analyzeCluster(), createJunction(), deleteJunction(), GNEEdge::getDest(), NBNetBuilder::getNodeCont(), GNEEdge::getSource(), myEdges, myNetBuilder, NODETYPE_TRAFFIC_LIGHT, GNEUndoList::p_begin(), GNEUndoList::p_end(), NBNodeCont::registerJoinedCluster(), remapEdge(), retrieveJunctions(), GNEJunction::setAttribute(), SUMO_ATTR_ID, SUMO_ATTR_TYPE, and toString().

Referenced by GNEApplicationWindow::onCmdJoinJunctions().

void GNENet::mergeJunctions	(	GNEJunction *	moved,
		GNEJunction *	target,
		GNEUndoList *	undoList
	)

merge the given junctions edges between the given junctions will be deleted

Parameters

[in]	moved	The junction that will be eliminated
[in]	target	The junction that will be enlarged
[in]	undoList	The undo list with which to register changes

Definition at line 469 of file GNENet.cpp.

References deleteJunction(), GNEEdge::getDest(), NBNode::getIncomingEdges(), GNEJunction::getNBNode(), NBNode::getOutgoingEdges(), NBNode::getPosition(), GNEEdge::getSource(), GNEJunction::move(), myEdges, GNEUndoList::p_begin(), GNEUndoList::p_end(), GNEJunction::registerMove(), and remapEdge().

Referenced by GNEViewNet::mergeJunctions().

void GNENet::moveSelection	(	const Position &	moveSrc,
		const Position &	moveDest
	)

Definition at line 857 of file GNENet.cpp.

References GNEEdge::getDest(), GNEEdge::getSource(), GNEEdge::moveGeometry(), retrieveEdges(), and retrieveJunctions().

Referenced by GNEViewNet::onMouseMove().

void GNENet::refreshElement ( GUIGlObject * o )

refreshes boundary information for o and update

Definition at line 592 of file GNENet.cpp.

References SUMORTree::addAdditionalGLObject(), myGrid, SUMORTree::removeAdditionalGLObject(), and update().

Referenced by GNEEdge::addConnection(), GNEEdge::addLane(), GNEJunction::move(), GNEPoly::moveGeometry(), GNEEdge::removeConnection(), GNEEdge::removeLane(), GNEEdge::setGeometry(), and GNEJunction::updateCrossingAttributes().

GNEEdge * GNENet::registerEdge ( GNEEdge * edge )

private

registers an edge with GNENet containers

Definition at line 949 of file GNENet.cpp.

References Boundary::add(), SUMORTree::addAdditionalGLObject(), GNEEdge::getBoundary(), GUIGlObject::getMicrosimID(), GNEReferenceCounter::incRef(), myEdges, myGrid, GNEEdge::setResponsible(), and update().

Referenced by GNENet(), and insertEdge().

GNEJunction * GNENet::registerJunction ( GNEJunction * junction )

private

registers a junction with GNENet containers

Definition at line 932 of file GNENet.cpp.

References Boundary::add(), SUMORTree::addAdditionalGLObject(), GNEJunction::getBoundary(), GUIGlObject::getMicrosimID(), GNEJunction::getNBNode(), NBNode::getPosition(), GNEReferenceCounter::incRef(), myGrid, myJunctions, myZBoundary, GNEJunction::setResponsible(), SUMOReal, update(), Position::z(), and Z_INITIALIZED.

Referenced by GNENet(), and insertJunction().

void GNENet::remapEdge	(	GNEEdge *	oldEdge,
		GNEJunction *	from,
		GNEJunction *	to,
		GNEUndoList *	undoList,
		bool	keepEndpoints = `false`
	)

private

Definition at line 493 of file GNENet.cpp.

References createEdge(), deleteEdge(), GNEEdge::getAttribute(), GUIGlObject::getMicrosimID(), GNE_ATTR_SHAPE_END, GNE_ATTR_SHAPE_START, GNEEdge::setAttribute(), and SUMO_ATTR_SHAPE.

Referenced by joinSelectedJunctions(), and mergeJunctions().

void GNENet::removeExplicitTurnaround ( std::string id )

remove edge id from the list of explicit turnarounds

Definition at line 851 of file GNENet.cpp.

References myExplicitTurnarounds.

Referenced by GNEEdge::removeConnection().

void GUIGlObject::removeParameterTable ( GUIParameterTableWindow * w )

inherited

Lets this object know a parameter window showing the object's values was closed.

Parameters

[in] w The closed parameter window

Definition at line 195 of file GUIGlObject.cpp.

References GUIGlObject::myParamWindows.

Referenced by GUIParameterTableWindow::~GUIParameterTableWindow().

void GNENet::removeSolitaryJunctions ( GNEUndoList * undoList )

Definition at line 779 of file GNENet.cpp.

References deleteJunction(), NBNode::getEdges(), GNEJunction::getNBNode(), myJunctions, GNEUndoList::p_begin(), and GNEUndoList::p_end().

Referenced by GNEApplicationWindow::onCmdCleanJunctions().

void GNENet::renameEdge	(	GNEEdge *	edge,
		const std::string &	newID
	)

updates the map and reserves new id

Definition at line 817 of file GNENet.cpp.

References NBNetBuilder::getEdgeCont(), Named::getID(), GNEEdge::getNBEdge(), myEdges, myNetBuilder, NBEdgeCont::rename(), and GNEEdge::setMicrosimID().

Referenced by GNEEdge::setAttribute().

void GNENet::renameJunction	(	GNEJunction *	junction,
		const std::string &	newID
	)

updates the map and reserves new id

Definition at line 836 of file GNENet.cpp.

References Named::getID(), GNEJunction::getNBNode(), NBNetBuilder::getNodeCont(), myJunctions, myNetBuilder, NBNodeCont::rename(), and GUIGlObject::setMicrosimID().

Referenced by GNEJunction::setAttribute().

void GNENet::replaceJunctionByGeometry	(	GNEJunction *	junction,
		GNEUndoList *	undoList
	)

void GNENet::requireRecompute ( )

inline

inform the net about the need for recomputation

Definition at line 379 of file GNENet.h.

References myNeedRecompute.

Referenced by changeEdgeEndpoints(), createEdge(), deleteEdge(), deleteLane(), duplicateLane(), and GNEJunction::invalidateShape().

void GNENet::reserveEdgeID ( const std::string & id )

private

Definition at line 993 of file GNENet.cpp.

References IDSupplier::avoid(), and myEdgeIDSupplier.

Referenced by createEdge().

void GNENet::reserveJunctionID ( const std::string & id )

private

Definition at line 999 of file GNENet.cpp.

References IDSupplier::avoid(), and myJunctionIDSupplier.

std::vector< GNEAttributeCarrier * > GNENet::retrieveAttributeCarriers	(	const std::set< GUIGlID > &	ids,
		GUIGlObjectType	type
	)

get the attribute carriers based on GlIDs

Parameters

[in]	ids	The set of ids for which to retrive the ACs
[in]	type	The GUI-type of the objects with the given ids

Exceptions

InvalidArgument if any given id does not match the declared type

Definition at line 600 of file GNENet.cpp.

References GUIGlObject::getMicrosimID(), GUIGlObjectStorage::getObjectBlocking(), GUIGlObjectStorage::gIDStorage, GLO_EDGE, GLO_JUNCTION, GLO_LANE, and GUIGlObjectStorage::unblockObject().

Referenced by GNEViewNet::onLeftBtnPress().

GNEEdge * GNENet::retrieveEdge	(	const std::string &	id,
		bool	failHard = `true`
	)

get edge by id

Parameters

[in]	id	The id of the desired edge
[in]	failHard	Whether attempts to retrieve a nonexisting junction should result in an exception

Exceptions

UnknownElement

Definition at line 541 of file GNENet.cpp.

References myEdges.

Referenced by GNEEdge::addConnection(), createEdge(), GNEApplicationWindow::GNEShapeHandler::getLanePos(), GNEConnector::initTargets(), GNEEdge::isValid(), GNEJunction::move(), GNEConnector::onCmdSelectConflicts(), GNEConnector::onCmdSelectDeadStarts(), GNEEdge::removeConnection(), and GNEJunction::setLogicValid().

std::vector< GNEEdge * > GNENet::retrieveEdges ( bool onlySelected = false )

return all edges

Parameters

[in] onlySelected Whether to return only selected edges

Definition at line 553 of file GNENet.cpp.

References GLO_EDGE, gSelected, GUISelectedStorage::isSelected(), and myEdges.

Referenced by GNEViewNet::deleteSelectedEdges(), finishMoveSelection(), GNETLSEditor::handleMultiChange(), moveSelection(), GNEConnector::onCmdSelectConflicts(), GNEConnector::onCmdSelectDeadEnds(), GNEConnector::onCmdSelectPass(), and GNEViewNet::onCmdStraightenEdges().

GNEJunction * GNENet::retrieveJunction	(	const std::string &	id,
		bool	failHard = `true`
	)

get junction by id

Parameters

[in]	id	The id of the desired junction
[in]	failHard	Whether attempts to retrieve a nonexisting junction should result in an exception

Exceptions

UnknownElement

Definition at line 529 of file GNENet.cpp.

References myJunctions.

Referenced by changeEdgeEndpoints(), GNEEdge::getDest(), GNEEdge::getSource(), GNEConnector::handleLaneClick(), GNEJunction::invalidateTLS(), GNEJunction::isValid(), GNEEdge::isValid(), and GNEEdge::setAttribute().

std::vector< GNEJunction * > GNENet::retrieveJunctions ( bool onlySelected = false )

return all junctions

Parameters

[in] onlySelected Whether to return only selected junctions

Definition at line 580 of file GNENet.cpp.

References GLO_JUNCTION, gSelected, GUISelectedStorage::isSelected(), and myJunctions.

Referenced by GNEViewNet::deleteSelectedJunctions(), finishMoveSelection(), joinSelectedJunctions(), moveSelection(), and GNEConnector::onCmdSelectDeadStarts().

std::vector< GNELane * > GNENet::retrieveLanes ( bool onlySelected = false )

return all lanes

Parameters

[in] onlySelected Whether to return only selected lanes

Definition at line 565 of file GNENet.cpp.

References GLO_LANE, gSelected, GUISelectedStorage::isSelected(), and myEdges.

Referenced by GNEViewNet::deleteSelectedEdges(), GNETLSEditor::handleMultiChange(), and GNEViewNet::onCmdDuplicateLane().

void GNENet::reverseEdge	(	GNEEdge *	edge,
		GNEUndoList *	undoList
	)

reverse edge

Parameters

[in] edge The edge to be reversed

Definition at line 425 of file GNENet.cpp.

References createEdge(), deleteEdge(), GNEEdge::getDest(), GNEAttributeCarrier::getID(), NBEdge::getInnerGeometry(), GNEEdge::getNBEdge(), GNEEdge::getSource(), GNEUndoList::p_begin(), PositionVector::reverse(), GNEEdge::setAttribute(), SUMO_ATTR_SHAPE, and toString().

Referenced by GNEViewNet::onCmdReverseEdge().

void GNENet::save ( OptionsCont & oc )

save the network

Parameters

[in] oc The OptionsCont which knows how and where to save

Definition at line 508 of file GNENet.cpp.

References computeAndUpdate(), myNetBuilder, and NWFrame::writeNetwork().

Referenced by GNEApplicationWindow::onCmdSaveNetwork().

void GNENet::saveJoined ( OptionsCont & oc )

save log of joined junctions (and nothing else)

Parameters

[in] oc The OptionsCont which knows how and where to save

Definition at line 522 of file GNENet.cpp.

References computeAndUpdate(), NBNetBuilder::getNodeCont(), myNetBuilder, and NWWriter_XML::writeJoinedJunctions().

Referenced by GNEApplicationWindow::onCmdSaveJoined().

void GNENet::savePlain ( OptionsCont & oc )

save plain xml representation of the network (and nothing else)

Parameters

[in] oc The OptionsCont which knows how and where to save

Definition at line 515 of file GNENet.cpp.

References computeAndUpdate(), myNetBuilder, and NWWriter_XML::writeNetwork().

Referenced by GNEApplicationWindow::onCmdSaveAsPlainXML().

void GUIGlObject::setMicrosimID ( const std::string & newID )

virtualinherited

Changes the microsimID of the object (happens in NETEDIT)

Reimplemented in GNEEdge.

Definition at line 110 of file GUIGlObject.cpp.

References GUIGlObject::createFullName(), GUIGlObject::myFullName, and GUIGlObject::myMicrosimID.

Referenced by renameJunction(), GNELane::setIndex(), and GNEEdge::setMicrosimID().

void GUIGlObject::setPrefix ( const std::string & prefix )

protectedinherited

Definition at line 204 of file GUIGlObject.cpp.

References GUIGlObject::createFullName(), GUIGlObject::myFullName, and GUIGlObject::myPrefix.

void GNENet::setUpdateTarget ( FXWindow * updateTarget )

inline

Set the target to be notified of network changes.

Definition at line 320 of file GNENet.h.

References myUpdateTarget.

GNEJunction * GNENet::splitEdge	(	GNEEdge *	edge,
		const Position &	pos,
		GNEUndoList *	undoList,
		GNEJunction *	newJunction = `0`
	)

split edge at position by inserting a new junction

Parameters

[in]	edge	The edge to be split
[in]	pos	The position on which to insert the new junction

Returns: The new junction

Definition at line 360 of file GNENet.cpp.

References TplConvert::_2int(), createEdge(), createJunction(), deleteEdge(), NBEdge::getGeometry(), GUIGlObject::getMicrosimID(), GNEEdge::getNBEdge(), GNEEdge::getSource(), GNE_ATTR_SHAPE_END, GNE_ATTR_SHAPE_START, PositionVector::nearest_offset_to_point2D(), GNEUndoList::p_begin(), GNEEdge::setAttribute(), PositionVector::splitAt(), SUMO_ATTR_SHAPE, SUMOReal, toString(), and GNEEdge::wasSplit().

Referenced by GNEViewNet::onCmdSplitEdge(), and splitEdgesBidi().

void GNENet::splitEdgesBidi	(	const std::set< GNEEdge * > &	edges,
		const Position &	pos,
		GNEUndoList *	undoList
	)

split all edges at position by inserting one new junction

Parameters

[in]	edges	The edges to be split
[in]	pos	The position on which to insert the new junction

Definition at line 414 of file GNENet.cpp.

References GNEUndoList::p_begin(), GNEUndoList::p_end(), and splitEdge().

Referenced by GNEViewNet::onCmdSplitEdgeBidi().

void GNENet::update ( )

private

notify myUpdateTarget

Definition at line 985 of file GNENet.cpp.

References myUpdateTarget.

Referenced by changeEdgeEndpoints(), computeEverything(), deleteSingleEdge(), deleteSingleJunction(), refreshElement(), registerEdge(), and registerJunction().

Friends And Related Function Documentation

friend class GNEChange_Edge

friend

Definition at line 80 of file GNENet.h.

Referenced by createEdge(), and deleteEdge().

friend class GNEChange_Junction

friend

Definition at line 79 of file GNENet.h.

Referenced by createJunction(), and deleteJunction().

Field Documentation

IDSupplier GNENet::myEdgeIDSupplier

private

Definition at line 427 of file GNENet.h.

Referenced by createEdge(), and reserveEdgeID().

GNEEdges GNENet::myEdges

private

Definition at line 422 of file GNENet.h.

Referenced by computeAndUpdate(), createEdge(), deleteJunction(), deleteSingleEdge(), getGlIDs(), GNENet(), joinSelectedJunctions(), mergeJunctions(), registerEdge(), renameEdge(), replaceJunctionByGeometry(), retrieveEdge(), retrieveEdges(), retrieveLanes(), and ~GNENet().

std::set<std::string> GNENet::myExplicitTurnarounds

private

list of edge ids for which turn-arounds must be added explicitly

Definition at line 435 of file GNENet.h.

Referenced by addExplicitTurnaround(), computeAndUpdate(), and removeExplicitTurnaround().

SUMORTree GNENet::myGrid

private

the rtree which contains all GUIGlObjects (so named for historical reasons)

Definition at line 408 of file GNENet.h.

Referenced by deleteSingleEdge(), deleteSingleJunction(), getBoundary(), getVisualisationSpeedUp(), GNENet(), refreshElement(), registerEdge(), and registerJunction().

IDSupplier GNENet::myJunctionIDSupplier

private

Definition at line 428 of file GNENet.h.

Referenced by createJunction(), and reserveJunctionID().

GNEJunctions GNENet::myJunctions

private

Definition at line 423 of file GNENet.h.

Referenced by computeAndUpdate(), createJunction(), deleteSingleJunction(), getGlIDs(), registerJunction(), removeSolitaryJunctions(), renameJunction(), retrieveJunction(), retrieveJunctions(), and ~GNENet().

bool GNENet::myNeedRecompute

private

whether the net needs recomputation

Definition at line 438 of file GNENet.h.

Referenced by computeAndUpdate(), computeEverything(), and requireRecompute().

NBNetBuilder* GNENet::myNetBuilder

private

The internal netbuilder.

Definition at line 414 of file GNENet.h.

Referenced by computeAndUpdate(), computeJunction(), deleteSingleEdge(), deleteSingleJunction(), getTLLogicCont(), GNENet(), insertEdge(), insertJunction(), joinSelectedJunctions(), renameEdge(), renameJunction(), save(), saveJoined(), savePlain(), and ~GNENet().

GUIShapeContainer GNENet::myShapeContainer

private

the container for additional pois and polygons

Definition at line 432 of file GNENet.h.

Referenced by getShapeContainer().

FXWindow* GNENet::myUpdateTarget

private

The window to be notofied of about changes.

Definition at line 411 of file GNENet.h.

Referenced by getApp(), setUpdateTarget(), and update().

Boundary GNENet::myZBoundary

private

the z boundary (stored in the x-coordinate), values of 0 are ignored

Definition at line 482 of file GNENet.h.

Referenced by getZBoundary(), GNENet(), and registerJunction().

const RGBColor GNENet::selectedLaneColor

static

Definition at line 84 of file GNENet.h.

Referenced by GNELane::drawGL().

const RGBColor GNENet::selectionColor

static

Definition at line 83 of file GNENet.h.

Referenced by GNEViewNet::doPaintGL(), GNELane::drawGL(), GNELane::drawMarkings(), and GNEJunction::setColor().

StringBijection< GUIGlObjectType > GUIGlObject::TypeNames

staticinherited

associates object types with strings

Definition at line 100 of file GUIGlObject.h.

const SUMOReal GNENet::Z_INITIALIZED = 1

staticprivate

marker for whether the z-boundary is initialized

Definition at line 485 of file GNENet.h.

Referenced by GNENet(), and registerJunction().

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Attributes

Protected Member Functions

Private Member Functions

Private Attributes

Static Private Attributes

Friends

internal GNE components

Detailed Description

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Field Documentation